|Rounded Top Scissor Case|
I have just made a refinement to the folded fabric scissor holder. The asymmetrical look at the top was a bit irritating so decided to take to my original pattern with the scissors and now have this rounded top version. I also made this one blunt across the bottom without the long point.
I have provided the pattern for you below. You will need to click on the pattern picture , when it opens up in the new window right click and save picture as. When you print the pattern out you need to make sure it is the size on the pattern, 8 3/8" wide or as close to that as you can get. Print it as large as your printer will allow and if you need to add extra around the outside to achieve the correct size you can do that.
|Curved Top Folded Fabric Scissor Holder|
Take the long edge on the left (with the turning hole in it) and tuck it in under the folded back piece on the right